- Air Sampling Pumps
- Calibration Equipment
- Servicing and Calibration
- Sampling Heads
- Sorbent Tubes
- Passive Samplers
- Particulate Monitors
- Filters and Cassettes
- Gas Sample Bags
- Air Sampling Kits
- Gastec Detection Tubes
- Face Level Sampling
- Surface & Skin Sampling
- Asbestos Sampling
- Bioaerosol Sampling
- Environmental Sampling
- Heat Stress Monitor
- Noise Monitoring
- Vibration Monitoring
SKC Grab Air Sample Pump
The Grab Air Bag Sample Pump is a simple pump, designed to fill sample bags at 1 L/min. It collects approximately 1000 L volume on one 9V akaline battery. It is recommended for use with sample bags up to 10 L size. Simply attach a sample bag to the outlet port and turn on the pump. Simple, quick, economical.
The Grab Air Sampler pulls air containing the sample into the pump at approximately 1 L/min and immediately exhausts it into a sample bag connected to the pump with PTFE tubing. Sampling is complete when the bag is properly filled.
Note: Not intended for use in explosive or hazardous environments.
The Grab Air Sample Pump is NOT CE/UK CA MARKED and cannot be sold within Europe or the UK.
Flow System |
|
|
Power Supply |
|
|
Case |
|
|
Dimensions |
|
|
Weight |
|
Description | Part Number |
Grab Air Pump | 222-2301 |
Description | Part Number |
Grab Air Sample Pump Hazmat Kit includes Pump, 9V alkaline battery, 1m (3ft) of 3/16 inch ID PTFE tubing, 10 x 1 Litre Tedlar Bags with single polypropylene fitting (part number 232-01) |
222-2111 |